Frequently Asked Questions

Honeycomb panels are available up to 4’ x 8’. Thicknesses range from ¼” to 12”

RhinoKore S150 Synthetic Foam Injected Honeycomb Panels weigh 14.2 oz./ sq. ft.

RhinoKore P100 Phenolic Kraft Foam Injected Honeycomb Panels weigh 10.2 oz./ sq. ft.

Note: Based on 12 in. x 12 in. x 1 in. sample

Yes, both honeycomb panels can be ordered without foam injection

RhinoKore S150 Synthetic Foam Injected Honeycomb Panels at 1 in. thick has an R 3.19 rating

RhinoKore P100 Phenolic Kraft Foam Injected Honeycomb Panels at 1 in. thick has an R 3.15 rating

Most traditional building products from thermoset and thermoplastic composite skins to metal, wood, or even concrete can effectively adhere to the surface of the RhinoKore honeycomb panels

RhinoKore foam injected honeycomb panels are less than half the weight of plywood and are not susceptible to rot.

RhinoKore S150 Synthetic Foam Injected Honeycomb Panels at 1`` thick has a 191 psi shear strength rating.

RhinoKore P100 Phenolic Kraft Foam Injected Honeycomb Panels at 1`` thick has a 156 psi shear strength rating.

RhinoKore S150 Synthetic Foam Injected Honeycomb Panels at 1`` thick has a 404 psi compressive strength rating.

RhinoKore P100 Phenolic Kraft Foam Injected Honeycomb Panels at 1`` thick has a 437 psi compressive strength rating.

RhinoKore S150 Synthetic Foam Injected Honeycomb Panels at 1`` thick has a 158.8 psi flexural strength rating at 5% strain.

RhinoKore P100 Phenolic Kraft Foam Injected Honeycomb Panels at 1`` thick has a 100.4 psi flexural strength rating at 5% strain.

Got a question that's not on the list? Contact us!